Keene Building Logo

Driwall™ Seam Fabric

20210323_191000405_iOS

Air/water Barrier - Seam Flashing

Driwall™ Seam Fabric (SF) is a lightweight roll flashing material with superior strength and the ability to bridge most gaps or voids common in construction.

Embedded into wet Driwall AWB HP or HB, it is used at flashing transitions with Keene air & water barrier applications. The tape easily embeds into wet Driwall AWB HP or HB and dries to a highly reinforced yet flexible flashing.

Features and Benefits

  • Lightweight
  • Embeds easily
  • Thin, won't build up wall surface
  • Compatible with Driwall™ HP & HB products 

 

Coverage

  • (4x8 sheets)
  • Square Footage x 0.37=linear feet of tape
  • Add linear footage around windows, doors, and other openings.
  • (coverage is not guaranteed)

 

Packaging 

  • 4"x180' (10.2cm x 54.9m), 18 rolls per case 
  • 6”x180’ (15.2cm x 54.9m), 12 rolls per case

Application Procedure 

  • General
    • The substrate must be clean, dry, structurally sound and free of efflorescence, oil, grease, form release agents and curing compounds. Test painted surfaces to verify bond.
  • Job Conditions
    • Air and substrate temperature for application of Driwall SF must be 40°F (5°C) or higher. Follow Driwall™ AWB HP or HB temperatures and condition requirements.
  • Temporary Protection
    • Protect from weather until the Driwall AWB HP or HB products have set up.
  • Surface Preparation
    • Surface temperature must be above 40°F (5°C). Surface must be cured, clean, dry, structurally sound and free of efflorescence, oil, grease, form release agents, and curing compounds.

QUESTIONS? CONTACT US

Looking for answers or need additional information including samples and literature, please fill out this form. A KEENE team member will contact you shortly.

*Required field